1.A dedicated cage designed for Canon 6D Mark II;
2.Multiple mounting interfaces (cold shoe, NATO rail, 1/4’’-20 and 3/8’’-16 threaded holes, Arri locating holes) for accessories;
Load Capacity: 88.18 lb
Max Height: 137.8"
Min. Height: 66.14"
Folded Length: 55.9"
Weight: 25.35 lb
Mount: 5/8" Male and 1-1/8" Female
1. It is made up of a ballhead with 1/4’’ screw, a ballhead with NATO clamp and a ballhead clamp.
2. It could attach plate with 1/4’’-20 threaded holes, such as Top Plate 1853, Side Plate 1854 or cage with 1/4’’-20 threaded holes, like a6500 Cage 1889 on the one end via ballhead with 1/4’’ screw, while it could also attach monitor with NATO rail with on the other end via ballhead with NATO clamp.
3. It could attach cage with NATO rail with on the other end via ballhead with NATO clamp, while it could attach monitor cage on the other end via ballhead with 1/4’’ screw.
1.Form-Fitted aluminum cage for Nikon Z6 and Nikon Z7.
2.Anti-twist flanges to keep the camera from twisting.
3.Multiple 1/4"-20 & 3/8"-16 & Arri 3/8”threaded holes for accessory attachment.
4.Features a cold shoe on the top for microphone mount or light.
5.Nato rail on the left side allows to quick release accessory with nato clamp.
6.Features a m2.5 threaded hole on the left side as a second lock point to prevent the camera form twisting.
15.4 lb Weight Capacity
Counterbalance Supports 8.8 lb
Spring-Loaded Counter Balance
Continuously Adjustable Pan/Tilt Drag
Pan Bar & Sliding Plate Included
- For Mirrorless, Action Cams, and Phones
- Supports Devices up to 1.4 lb
- 360° Rotation Along All Three Axes
- Large 4-Way Joystick
- Lock, Yaw, Pitch/Yaw, and Inverted Modes
- 32-Bit Triple-MCUs at 4 kHz Frequency
- High Accuracy Brushless Motors
- Toolless Adjustment of All Axes
- Remote iOS/Android Control via Bluetooth
- 12-Hour Runtime On Included Batteries
Fluid Drag Head with 29.8 lb Capacity
509PLONG Sliding Quick Release Plate
Four-Step Counterbalance System
Fluid Drag System for Pan & Tilt Axes
Manfrotto Bridging Technology
Two-Stage Legs, Ground-Level Spreader
Height Range from 18.9 to 67.7"
Illuminated Leveling Bubble
Padded Carrying Bag Included
Note: Max load = 1.5kg
SmallRig DSLR Monitor Holder Mount 1842
SmallRig DSLR Monitor Holder Mount 1842 is used to mount the monitor to the cage. It enables the cameraman to have better monitoring as per the needs in different shooting scenarios. It features great convenience for the cameraman.
Load Capacity: 5.5 lb
Max Height: 7.7"
Min Height: 2.4"
Leg Sections: 2
Weight: 9.4 oz
Integrated Ball Head
Two Leg Angles
SmallRig Mounting Clamp for DJI Ronin S Gimbal 2221
1. Designed for Ronin S Gimbal.
2. Features nato rail on each side allows to quick release accessories.
3. Multiple 1/4”-20 and two arri 3/8” holes for accessory attachment.
4. Add rubber inside the clamp to prevent scratching the gimbal.
SMALLRIG EOS C100/C300/C500 Mark II Hot Shoe Kit 1669, this kit is consist of an easy top plate, a quick release safety rail and a C100 & C100 Mark II hot shoe.
42MP Full-Frame Exmor R BSI CMOS Sensor
BIONZ X Image Processor & Front-End LSI
399-Point AF System & 10 fps Shooting
UHD 4K30p Video with HLG & S-Log3 Gammas
3.69m-Dot Tru-Finder OLED EVF
- Sony Alpha A7iii
-SmallRig Camera Cage Kit for Sony A7RIII/A7III 2103
-SmallRig LCD Screen Sunhood for Sony A7 A7II A7III A9 Series Cameras 2215
- On sale!
Supports Cameras up to 10 Pounds
Compatible with Matrice 600
Robust Magnesium Construction
Radio Controller for Second Operator
iOS / Android App-Based Control
- On sale!
- For Mirrorless & DSLR Cameras up to 7 lb
- FF Control for Select Canon DSLRs
- Pro-Grade Image Stabilization
- OLED Display
- Camera Control via Handgrip Buttons
- 6000mAh Battery Runs up to 18 Hours
- Power Select Sony Cameras via Gimbal
- Quick Release Camera Plate
- Gradual Power-Down Protects Camera