AKG PZM10 LL Hemispherical Flush-Mount Boundary Layer Microphone with Line-Level Output (White)
AKG PZM10LL Specs
|Frequency Response||80 Hz to 20 kHz|
|Impedance||240 Ohms, balanced|
|Sensitivity||Open Circuit: 2.5 mV/Pa (-52 dBV/Pa)
Power: -52 dBm/Pa
|Equivalent Noise Level||26 dBA SPL typical|
|Recommended Load Impedance||1000 Ohms minimum|
|Signal-to-Noise Ratio||68 dB at 94 dB SPL|
|Maximum SPL||120 dB SPL (produces 3% THD)|
|Power Requirements||12 to 24 VDC phantom power|
|Current Drain||400 µA|
|Output Connector||Unterminated pigtail|
|Low Frequency Roll-Off||No|
|Construction Material||Steel plate and housing|
|Dimensions (L x Diam)||2.8 x 1.3" / 7.2 x 3.2 cm|
|Weight||2.6 oz / 73.6 g|
|Package Weight||0.5 lb|
|Box Dimensions (LxWxH)||5.8 x 3.8 x 2.6"|
16 other products in the same category:
Product Highlights Gooseneck Microphone Capsule Cardioid To Reject Noise From Rear 125° Pickup for Vivacious Speakers Contacts Designed For Reliability Speech-Optimized Audio Performance Includes Windscreen
Product Highlights Works with DPT 700, PT 400, PT 4000, PT 450, PT 4500, and PT 470 Transmitters
The AKG RMU40-Pro is a rackmount kit that enables one or two WMS40-Pro wireless microphone receivers to mount into a standard 19-inch rack for easy transport and storage.
The pack of five black WM82 MicroLite Wiremesh Caps from AKG can be used with the LC82 MD (lavalier), EC82 MD (ear-hook), and HC82 MD (headworn) reference lightweight omnidirectional microphones to protect the membrane from wind and pop noise, as well as environmental dirt.
Sound Devices XL-1B is a 12" (304.8mm) long cable with TA3-Female to TA3-Female connections.
Articulating Arm Internal 20' (6m) Cable 3-pin XLR Connection Aluminum Table Clamp
Product Highlights Fits D5 Wireless Transmitter Supercardioid Polar Pattern Dynamic Element
Product Highlights Band 7 / 500 to 530 MHz 18 Channels for Max Bandwidth 2x AA Battery Powered 12 Hour Average Battery Life Remaining Battery Life Display Camera Mountable for Event Video 2x Audio Outputs All Metal Body Backlit Display
Product Highlights Band 7 / 500.1 - 530.5MHz For WMS470 System Mini-XLR Connector 1200 Selectable Frequencies Up to 16 Pre-Programmed Frequencies Automatic Setup Infrared Transmitter & Receiver Sync
The AKG MKA5 is a connector cable for external antennas, antenna boosters, antenna booster supplies, antenna power splitters and receivers.
The pack of five cocoa WM82 MicroLite Wiremesh Caps from AKG can be used with the LC82 MD (lavalier), EC82 MD (ear-hook), and HC82 MD (headworn) reference lightweight omnidirectional microphones to protect the membrane from wind and pop noise, as well as environmental dirt.
Product Highlights For Stereo Recordings 3/8" Threads Metal Construction
The pack of ten MUP82 Make-Up Protectors from AKG can be used to protect your microphone's omnidirectional capsule during make-up application.
Product Highlights D7 Capsule for WMS 4500 Transmitter Patented Varimotion Diaphragm Supercardioid Polar Pattern