• Sound Devices MP-1 - Single Channel Portable Microphone Preamplifier-Mixers-MP-1-DIGI TECH Trading L.L.C
  • Sound Devices MP-1 - Single Channel Portable Microphone Preamplifier-Mixers-MP-1-DIGI TECH Trading L.L.C
  • Sound Devices MP-1 - Single Channel Portable Microphone Preamplifier-Mixers-MP-1-DIGI TECH Trading L.L.C
Sound Devices MP-1 - Single Channel Portable Microphone Preamplifier-Mixers-MP-1-DIGI TECH Trading L.L.C
MP-1

Sound Devices MP-1 - Single Channel Portable Microphone Preamplifier

AED1,789.00
Tax excluded
Key Features
  • Compact and Portable
  • Transformer-Balanced
  • Extended-Range Peak Limiter
  • Runs on Two AA Batteries
Description

Sound Devices MP-1 Overview

Designed for high-definition field production applications, the Sound Devices MP-1 is a single channel microphone preamp that delivers studio grade audio in a portable, lightweight package. The unit features a transformer balanced XLR microphone input and line level output resulting in high gain and low noise floor. A large gain adjustment dial provides up to 66 dB of gain in eleven discrete steps.

A 3-position phantom power switch enables 12V or 48V phantom power for condenser microphones. A low-cut filter switch eliminates noise due to wind and proximity effect at 80 Hz or 160 Hz (user switchable). Peak limiter switch moderates signal peaks, eliminating distortion due to signal over load. The MP-1 is powered with 2 AA batteries for approximately 24 hours.

Transformer Balanced I/O

The MP-1 features a transformer balanced XLR microphone input and line level output resulting in high gain and low noise floor.

Variable Gain

A large gain adjustment dial provides up to 66 dB of gain in eleven discrete steps.

Compact & Portable

The unit measures approximately 3" wide and 5" in depth and operates on 2-AA alkaline batteries for up to 24 hours (typical).

Peak Limiter & Low-Cut Filter

Peak limiter switch moderates signal peaks, eliminating distortion due to signal over load. A low-cut filter switch eliminates noise due to wind and proximity effect at 80 Hz or 160 Hz (user switchable).

 

 

Specific References

Sound Devices MP-1 Specs

Inputs 1 - XLR 3-pin female, transformer-balanced
Output 1 - XLR 3-pin male, transformer-balanced
Monitor/Headphone Out No
ALT I/O No
Link Input/Output No
Impedance Input: 2000 Ohms
Output: 130 Ohms
Gain 0 dB to 66 dB input to output, switch selectable
Hum & Noise EIN: -126 dBu (-128 dBV) max
150 Ohms source, flat weighting, 22 Hz - 22 kHz bandwidth, gain setting 36 dB or greater)
Frequency Response 20 Hz - 22 kHz, +0.1, -0.5 dB, -1 dB at 50 kHz
(relative to 1 kHz level with 150 Ohms source)
Distortion 0.05% max.
(from 60 Hz to 22 kHz @ +4 dBu output level, 22 Hz - 22 kHz filter bandwidth, +46 dB gain setting)
Metering Power LED
Green: Indicates power and full battery
Red: Indicates power and low battery - red status indicates 4 hours of battery life remain
Control Voltage Out No
Phantom Power +48 V & +12 V
Operating Temperature 0 to 70 degrees C (32 to 1 degrees F)
Power 2-AA alkaline batteries
24 hours life typical with +4 dBu signal into 600 Ohms, no phantom power
Dimensions 1.7 x 3.7 x 5.5" (43 x 94 x 140 mm) (HxWxD)
Weight 1.24 lbs (0.56 kg)

 
Packaging Info
 
Package Weight 2.05 lb
Box Dimensions (LxWxH) 10.7 x 7.3 x 5"
  • Sound Devices MP-1 - Single Channel Portable Microphone Preamplifier
  • Limited 2-Year Warranty.
  • Not in the Box:
  • Batteries & Power (Not Included).

For Better Expireience Please Visit Our New Website www.digitech.tv

Categories

On sale