16 other products in the same category:
Product Highlights Cardioid & Hypercardioid Polar Pattern Pre-Polarized Design Gold-Sputtered Capsule Housing Switchable 10 dB Pad Switchable Low-Cut Filter at 80 Hz Three Frequency-Response Settings Powered by Phantom or Two AA Batteries 120-Hour Battery Life Humidity-Protected
Product Highlights Gooseneck for Installations Designed For Long Life Integrated Switchable LED Ring Integrated System Connector Mounting Accessories Available Works CK41, CK43 and CK49 Capsules
Key Features Convert SD & HD Formats Hot-Swappable Card for OpenGear Frame Converts 720p to 1080i/p or Vice Versa Standards Conversion: NTSC & PAL I/O
Note: Max load = 1.5kg SmallRig DSLR Monitor Holder Mount 1842 SmallRig DSLR Monitor Holder Mount 1842 is used to mount the monitor to the cage. It enables the cameraman to have better monitoring as per the needs in different shooting scenarios. It features great convenience for the cameraman.
Regular price AED165.00 -10% Price AED148.50
Hardware raid. Dual removable, enterprise-class 7200RPM HDD. HDMI port (4k 60fps & HDR ready). Daisy-chaining for 5 additional devices. Dual thunderbolt 3 ports and USB-C port. Transfer rates up to 500 MB/s. Up to 24TB of storage. 5-year limited warranty.
Product Highlights Supercardioid Polar Pattern Laminated Varimotion Diaphragm Integrated 80 Hz High-Pass Filter Integrated Hum-Compensating Coil High Feedback Suppression 70 Hz to 20 kHz Frequency Response High Maximum SPL Noiseless On/Off Switch Includes Replacement Inner Windscreen Includes Stand Adapter and Storage Bag
Product Highlights Use with the H5 and H6 Recorders Directional Shotgun Mic Three Internal Microphones Built-In Preamp Super-Cardioid Polar Pattern Designed for Film, ENG and More Hairy Windscreen Included
Key Features 3 x LS-mini20c Bi-Color Heads 3 x 4-Way Barndoors 3 x NP-F970 Batteries and Chargers 3 x Battery Adapters, 3 x AC Supplies
Product Highlights Cardioid, Omnidirectional & Figure-8 Dual 1-Inch Capsule Switchable 6, 12, & 18 dB Pads Three Switchable Bass-Cut Filters Lock Mode to Disable Controls Peak-Hold LED Shockmount, Pop Filter, Case Designed and Manufactured in Austria
Fits on Left and Right Sides Secures Using Included 1/4"-20 Screws Carved From Rosewood
Regular price AED235.00 -10% Price AED211.50
Key Features Rack Mount Card SDI Converter 1 Input/9 Outputs / SD/HD/2K/3G Support 16 Channels of Embedded Audio Sits on 2 Slots of 20-Slot 2RU Frames
SmallRig 15mm LWS Universal Lens Support 2152 Key Features: 1.Universal 15mm LWS Rod Mount Lens Support 2.6mm Horizontal Adjustment, 22mm Vertical Adjustment 3.One Piece Anti-off designed 1/4"-20 Threaded Support Rod 4.Includes Universal Y-Bracket 5.Allows to Quick Attachment/Detachment without Removing Other Rod-Mount Accessories
Regular price AED175.00 -10% Price AED157.50
Product Highlights For Cameras and Intercom For Connecting HSD Headsets 5-Pin XLR Male Connector 70.9" Cable
For Blackmagic Pocket Cinema Camera 4K 768GB Overall Storage Capacity 1 x 512GB SSD2go PKT Solid-State Drive 1 x 256GB AV Pro CFast 2.0 Card SSD Interface: USB 3.1 Gen 2 Type-C SSD Read Speeds up to 560 MB/s SSD Write Speeds up to 500 MB/s CFast Read Speeds up to 550 MB/s CFast Write Speeds up to 450 MB/s 2.4 Million Hours MTBF
SmallRig NATO Cheese Handle 1688 is clamped onto a NATO-compatible rail and features 1/4"-20 and 3/8"-16 mounting holes for connecting accessories, as well as a single 15mm rod port. Moreover, the integrated shoe mounts at both ends are attached with shoe mount style accessories, such as LED lights, microphones etc. The handle comes with the hole pattern for ARRI accessory mount pins....
Regular price AED365.00 -10% Price AED328.50